E.A.R.S. PRO AUDIO
Follow Us
  • HOME
  • STORE
    • Evidence Audio
      • Carl Martin
        • Boomerang
          • StageTrix
            • Pedaltrain
            • ABOUT
            • CONTACT
            • POLICIES
            • LINKS
            icon
            icon
            icon
            icon

            The RevealTM

            A line-level cable for use in applications where flexibility and a compact form-factor are required, without sacrificing sound quality.  Built on the design priorities of Evidence Audio to reduce the effects of strand interaction and allow music to pass through the cable unaltered. 

            Patch Cables:
            Each patch cable is assembled according to order specifications.  The Reveal is the most flexible cable in the EA family.  It is well suited for fitting into tight places while still delivering huge sound.  We recommend lengths of at least 6" though to ensure maximum durability and flexibility.

            Instrument Cables:
            Longer cables will be terminated with Neutrik NP2X-BAG (straight) and/or NP2RX-BAG (right angle).  Please choose the desired connectors in the drop down menu when ordering.  Cables can be made to any desired length.  If a required length is not listed in the menu, please contact us.

            Additional:
            The Reveal, like all cable, is directional.  This means sound travels through it with better tonal qualities in one direction than the other.  This is identified by the writing on the cable; as the lettering goes, so does the signal. 



            IGL-ECS Conductor:  Minimizes the effects of strand interaction, the single largest source of distortion in cables.
            High Purity Copper: 
            Open and extended mid-range and high frequencies without artificial etching or glare.
            IGL Spiral Served Shield: 
            Parallel conductor geometry minimizes strand interaction compared to braided shields.
            Organic Insulation: 
            Unbleached cotton wraps the conductor with a lower dielectric constant than polymers, to preserve micro-dynamics and resolution of detail.
            Carbon Skin: 
            Extruded over the primary lead to reduce triboelectric (mechanically induced) noise
            High Density Copper Served Shield: 
            Provides proper protection against noise and maintains flexibility.
            Low Capacitance: 
            May be used in long runs without high-frequency attenuation.

            Shop by Brand                                                        Shop by Category                                           Site Links
            Evidence Audio
            Carl Martin Effects
            Boomerang
            StageTrix
            Neutrik
            Switchcraft
            Pedaltrain
            Patch Cables
            Guitar Cables
            Microphone Cables
            TRS Cables
            Speaker Cables
            Power Cables

            OD/Distortion Pedals
            Chorus Pedals
            Delay Pedals
            Compression Pedals
            Loopers
            Pedalboard Accessories
            Pedalboards
            Home
            Store
            Contact
            About
            Policies
            Links


            SiteLock

            © 2012 E.A.R.S. PRO AUDIO, LLC.  All rights reserved. 

            Design by DivTag Templates
            Web Hosting by FatCow