The Lyric HG™
|
|
Patch Cables: Each patch cable is assembled according to order specifications. Length is measured from tip rod to tip rod when the cable is stretched flat. The Lyric HG has two solid copper core conductors which lend to superb sound, not to flexibility, which is why we recommend lengths of at least 8" to ensure maximum durability and flexibility. Only Neutrik 1/4" connectors are used. Instrument Cables: Instrument cables will be terminated with Neutrik NP2X-BAG (straight) and/or NP2RX-BAG (right angle). The desired connectors are listed in the drop down menu in the store. If a required length is not listed in the menu, please contact us. Additional: The Lyric HG Cable, like all cable, is directional. This means sound travels through it with better tonal qualities in one direction than the other. This will be signified by a red boot on one end of the cable for patch cables under 12 inches. The red plug indicates the destination (amplifier) path of the signal (the "IN" side of pedals). On longer cables, a heat shrink is added with an arrow pointing to the destination side of the cable. |
A refinement of the original Lyric cable with greater resolving ability. Yin to the Yang of the Forte.
|
Design Consideration:
IGL™ Copper conductors: Symmetrical Design: Solid Core Conductors: 20 awg Conductor Size: Enhanced Dielectric: Conductive skins applied - to positive and negative runs: High Density Copper Braid Shield: Woven Nylon Jacket: |
Result:
Smooth mid-range and highs Dynamics scream from the quietest of backgrounds without using the shield to carry your signal Preserve clarity and focus, revealing harmonic detail and articulation Large enough to communicate punch and authority, small enough to preserve a sense of air and delicacy Additional air reduces dielectric involvement Reduced microphonics with high gain amps Nothing but signal gets to your amp Increases flexibility and protection for stage use. |
 W3B2 Dual Wall Adhesive Heat Shrink |
|
Design by DivTag Templates